Off

:dizzy: Macros are compatible with Klipper only.

Just an idea more than a copy-pastable macro as yours will be different.

It’s just handy to have a shortcut to turn off everything at once!

[gcode_macro OFF]
gcode:
    M84                                  ; turn steppers off
    TURN_OFF_HEATERS                     ; turn bed / hotend off
    M107                                 ; turn print cooling fan off
    #SET_FAN_SPEED FAN=Exhaust SPEED=0   ; turn exhaust fan off
    #SET_FAN_SPEED FAN=BedFans SPEED=0   ; bed fan off
    #SET_PIN PIN=caselight VALUE=0       ; turn case light off